Intruder Alert System

Authors

  • Orland Mark P. Parac, MTE Master of Technology Education, University of Southern Mindanao - Kidapawan City Campus, Sudapin, Kidapawan City, North Cotabato, Philippines Author
  • Uldarico E. Lavalle Jr., PhD Associate Professor I, College of Trades and Industries, University of Southern Mindanao, Kabacan, Cotabato, Philippines Author

DOI:

https://doi.org/10.65339/ijggsd.V1.I1.65

Keywords:

Detection Accuracy, Intruder Alert System, Occupational Safety, Proximity Detection, Ultrasonic Sensors, Welding Safety

Abstract

This study aimed to design, fabricate, and evaluate an Intruder Alert System for improving proximity awareness in welding workspaces. A developmental and quantitative descriptive design was employed in selected welding shops and construction sites in Kidapawan City, North Cotabato, Philippines. The prototype integrated ultrasonic sensors, microcontrollers, audible alarms, and visual indicators. Performance was assessed through repeated detection trials at distances of 0.4–2.2 meters, while an expert-validated five-point questionnaire evaluated design, safety, and convenience among 50 purposively selected welders. Data were analyzed using frequencies, percentages, and modes. Across four sensors and tested orientations, detection succeeded in all ten trials at each distance from 0.4 to 1.6 meters (100%), declining to 30% at 1.8 meters, 10% at 2.0 meters, and 0% at 2.2 meters. Respondents rated the device highly acceptable across design, safety, and convenience (overall mode = 5 in each category), although ventilation, workflow interference, and sustained operation required improvement. The system therefore demonstrated reliable short-range detection and favorable user acceptability as a supplementary workplace warning device. Sensor optimization, improved thermal management, and extended operational testing are recommended. Findings are limited by purposive sampling in one locality, restricted detection distances, and the absence of direct injury-reduction outcomes. The prototype contributes a practical technological option for occupational hazard awareness, supporting SDG 3 (Good Health and Well-Being), SDG 8 (Decent Work and Economic Growth), and SDG 9 (Industry, Innovation and Infrastructure) through potential improvements in workplace safety and industrial innovation.

References

Canadian Centre for Occupational Health and Safety. (2024). Welder. https://www.ccohs.ca/oshanswers/occup_workplace/welder.html

Canadian Centre for Occupational Health and Safety. (2025). Welding—Personal protective equipment and clothing. https://www.ccohs.ca/oshanswers/safety_haz/welding/ppe.html

Decker, K., Pate, M., Sorensen, T., Burrows, M. S., Kraus, K. N., & Edgar, D. (2024). Differences between male and female welding students’ tinkering self-efficacy. Online Journal for Workforce Education and Development, 12(1), Article 2. https://opensiuc.lib.siu.edu/ojwed/vol12/iss1/2/

Demeke, A. Y., Heravi, M. Y., Dola, I. S., Jang, Y., Le, C., Jeong, I., Lin, Z., & Wang, D. (2025). Advancing highway work zone safety: A comprehensive review of sensor technologies for intrusion and proximity hazards. Transportation Research Record, 2679(2), 1066–1089. https://doi.org/10.1177/03611981241265845 DOI: https://doi.org/10.1177/03611981241265845

Habibi, E., Khorshidikia, S., Rismanchian, M., & Popov, G. (2025). Identifying training needs and occupational hazards among welders: A cross-sectional study in the metal manufacturing industry. Health Scope, 14(3), Article e160737. https://doi.org/10.5812/healthscope-160737 DOI: https://doi.org/10.5812/healthscope-160737

Khaleel, H. Z., Ahmed, A. K., Al-Obaidi, A. S. M., Luckyardi, S., Al Husaeni, D. F., Mahmod, R. A., & Humaidi, A. J. (2024). Measurement enhancement of ultrasonic sensor using pelican optimization algorithm for robotic application. Indonesian Journal of Science and Technology, 9(1), 145–162. https://doi.org/10.17509/ijost.v9i1.64843 DOI: https://doi.org/10.17509/ijost.v9i1.64843

Kim, K., Jeong, I., & Cho, Y. K. (2023). Signal processing and alert logic evaluation for IoT-based work zone proximity safety system. Journal of Construction Engineering and Management, 149(2), Article 05022018. https://doi.org/10.1061/JCEMD4.COENG-12417 DOI: https://doi.org/10.1061/JCEMD4.COENG-12417

Magoha, L., Nyanza, E. C., Asori, M., & Thomas, D. S. K. (2024). Informal welders' occupational safety and environmental health risks in northwestern Tanzania. PLOS Global Public Health, 4(2), Article e0002923. https://doi.org/10.1371/journal.pgph.0002923 DOI: https://doi.org/10.1371/journal.pgph.0002923

Mastrolembo Ventura, S., Bellagente, P., Rinaldi, S., Flammini, A., & Ciribini, A. L. C. (2023). Enhancing safety on construction sites: A UWB-based proximity warning system ensuring GDPR compliance to prevent collision hazards. Sensors, 23(24), Article 9770. https://doi.org/10.3390/s23249770 DOI: https://doi.org/10.3390/s23249770

Nalugya, A., Kiguli, J., Wafula, S. T., Nuwematsiko, R., Mugambe, R. K., Oputan, P., Tigaiza, A., Isunju, J. B., & Ssekamatte, T. (2022). Knowledge, attitude and practices related to the use of personal protective equipment among welders in small-scale metal workshops in Nansana Municipality, Wakiso District, Uganda. Health Psychology and Behavioral Medicine, 10(1), 731–747. https://doi.org/10.1080/21642850.2022.2106987 DOI: https://doi.org/10.1080/21642850.2022.2106987

Qiu, Z., Lu, Y., & Qiu, Z. (2022). Review of ultrasonic ranging methods and their current challenges. Micromachines, 13(4), Article 520. https://doi.org/10.3390/mi13040520 DOI: https://doi.org/10.3390/mi13040520

Rihmi, M. K., Bintoro, G., Rahman, M. A., Puspito, G., & Muntaha, A. (2024). Accuracy analysis of distance measurement using sonar ultrasonic sensor HC-SR04 on several types of materials. Journal of Environmental Engineering and Sustainable Technology, 11(1), 10–13. https://doi.org/10.21776/ub.jeest.2024.011.01.2 DOI: https://doi.org/10.21776/ub.jeest.2024.011.01.2

Sivakumar, S. K., Sivan, V., & Antony, G. C. (2024). SafeSense: Real-time safety alerts for construction workers. In Proceedings of the 41st International Symposium on Automation and Robotics in Construction (pp. 428–435). International Association for Automation and Robotics in Construction. https://doi.org/10.22260/ISARC2024/0056 DOI: https://doi.org/10.22260/ISARC2024/0056

Teixeira Júnior, H. J., Freitas, E. J. R., Araújo, L. S., & Santana, A. C. (2024). Estudo e tratamento da interferência da temperatura em um sensor de distância ultrassônico [Study and treatment of temperature interference in an ultrasonic distance sensor]. Congresso Brasileiro de Automática, 4(1). https://doi.org/10.29327/1863744.1-9 DOI: https://doi.org/10.29327/1863744.1-9

United Nations Department of Economic and Social Affairs. (2024). The sustainable development goals report 2024. United Nations. https://unstats.un.org/sdgs/report/2024/

Velmurugan, G., Arun, S. R., Venkatesh, K., & Venkatesh, R. (2023). Minimizing risks in close proximity ARC welding with autonomous AI-powered welding system: Risk assessment and hazard prevention. In 2023 3rd International Conference on Pervasive Computing and Social Networking (ICPCSN) (pp. 1750–1755). IEEE. https://doi.org/10.1109/ICPCSN58827.2023.00293 DOI: https://doi.org/10.1109/ICPCSN58827.2023.00293

von Querfurth, B., Belhout, S.-E., Knaak, C., Mann, S., Abels, P., Holly, C., Tatman, J., Barborak, D., & Hargadine, M. (2025). AI-driven autonomous adaptative feedback welding machine. Welding in the World, 69(5), 1419–1426. https://doi.org/10.1007/s40194-024-01898-z DOI: https://doi.org/10.1007/s40194-024-01898-z

Downloads

Published

2026-11-15

How to Cite

Parac, O. M. P., & Lavalle Jr., U. E. (2026). Intruder Alert System. International Journal of Global Goals and Sustainable Development, 1(1), 774-783. https://doi.org/10.65339/ijggsd.V1.I1.65