Smart Fume Detection, Extraction, and Filtration System for CNC Laser Machines
DOI:
https://doi.org/10.65339/ijggsd.V1.I1.74Keywords:
Air Filtration, CNC Laser Machines, Fume Detection, Occupational Safety, Sensor Reliability, Smart Monitoring, Sustainable Manufacturing, Ventilation SystemAbstract
This study developed and evaluated a Smart Fume Detection, Extraction, and Filtration System for CNC Laser Machines at Cebu Technological University–Argao Campus to improve airborne contaminant management during laser cutting and engraving. Anchored in the Cyber-Physical Machine Tool framework, sensor-based monitoring, airflow and filtration principles, Sustainable Manufacturing, and Garvin's Eight Dimensions of Quality, the study employed a developmental research design. The prototype integrated MQ-4 and MQ-135 sensors, microcontroller-based control, automated ventilation, warning mechanisms, digital monitoring, and multistage filtration. Data were collected through 20 controlled operational trials involving plywood and acrylic specimens, technical measurement instruments, observation logs, and questionnaire evaluations from 100 purposively selected respondents. Descriptive statistics and inferential tests assessed technical performance, material-based differences, and contaminant reduction. Results demonstrated 91.7% detection accuracy, 91.2% sensor reliability, a 4.28-second response time, 53.9 CFM extraction airflow, and 77.4% filtration efficiency, meeting all established benchmarks. Mean measured fume concentration decreased significantly from 393.29 ppm to 88.97 ppm, representing a 77.38% reduction (p < 0.0001). Significant differences between plywood and acrylic were observed in detection accuracy, response time, airflow, and fume concentrations, but not in sensor reliability or filtration efficiency. The prototype obtained an overall quality rating of 3.82, interpreted as Reliable. Further sensor calibration, extended testing, and contaminant-specific occupational safety validation are recommended. The study supports Sustainable Development Goals 3, 4, 8, 9, and 12 through occupational health, technical education, safer working conditions, industrial innovation, and responsible production. Its sustainability contribution includes improved fume management, adaptable automation, and institutional operating and maintenance guidance, subject to further validation before broader implementation.
References
Açık, C. (2023). Innovation of traditional furniture surface decoration techniques with CNC laser-assisted regression modeling production method: Product design study. Drvna Industrija, 74(2). https://doi.org/10.5552/drvind.2023.0055 DOI: https://doi.org/10.5552/drvind.2023.0055
Ahmed, S. H., Al-Sarraj, G. I., & Abdelhafeez Hassan, A. (2025). CNC Machine Design and Manufacture for Laser Drawing and Engraving. SVU-International Journal of Engineering Sciences and Applications, 6(2). https://doi.org/10.21608/svusrc.2025.425646.1303 DOI: https://doi.org/10.21608/svusrc.2025.425646.1303
Ameer, T., & Fatahi Valilai, O. (2025). Predictive exploratory data analysis of shopfloor CNC machine operation through a machine learning model. Journal of Open Innovation: Technology, Market, and Complexity, 11(2). https://doi.org/10.1016/j.joitmc.2025.100559 DOI: https://doi.org/10.1016/j.joitmc.2025.100559
Anrinal, Fadherizal, M., & Yanto, A. (2023). Performance Testing of The CNC Laser Engraver Machine on Plywood Media. Jurnal Teknik Mesin, 13(1). https://doi.org/10.21063/jtm.2023.v13.i1.1-5 DOI: https://doi.org/10.21063/jtm.2023.v13.i1.1-5
Anrinal, Putra, I. M., & Viola, R. O. (2022). Manufacturing System Design of a CNC Laser Engraver. Jurnal Teknik Mesin, 12(1). https://doi.org/10.21063/jtm.2022.v12.i1.32-38 DOI: https://doi.org/10.21063/jtm.2022.v12.i1.32-38
Çekik, R., & Turan, A. (2025). Deep Learning for Anomaly Detection in CNC Machine Vibration Data: A RoughLSTM-Based Approach. Applied Sciences (Switzerland), 15(6). https://doi.org/10.3390/app15063179 DOI: https://doi.org/10.3390/app15063179
Das, U. C., Shaik, N. B., Suanpang, P., Nath, R. C., Mantrala, K. M., Benjapolakul, W., Gupta, M., Somthawinpongsai, C., & Nanthaamornphong, A. (2024). Development of automatic CNC machine with versatile applications in art, design, and engineering. Array, 24. https://doi.org/10.1016/j.array.2024.100369 DOI: https://doi.org/10.1016/j.array.2024.100369
Department of Labor and Employment. (2025). Department Order No. 252-25: Revised implementing rules and regulations of Republic Act No. 11058. Bureau of Working Conditions. [Department of Labor and Employment, Department Orders](https://bwc.dole.gov.ph/issuances/department-orders/?utm_source=chatgpt.com)
Elvaris Manalu, E. A., Asmed, A., Mulyadi, M., Yuliarman, Y., & Sumiati, R. (2023). Perancangan Mesin CNC Acrylic Cutting 3 Axis Dengan Menggunakan Laser Tube CO2. Jurnal Teknik Mesin, 16(1). https://doi.org/10.30630/jtm.16.1.880 DOI: https://doi.org/10.30630/jtm.16.1.880
Garvin, D. A. (1987). Competing on the eight dimensions of quality. Harvard Business Review, 65(6), 101–109. https://hbr.org/1987/11/competing-on-the-eight-dimensions-of-quality
Gyasi, E. A., Antila, A., Owusu-Ansah, P., Kah, P., & Salminen, A. (2022). Prospects of Robot Laser Cutting in the Era of Industry 4.0. World Journal of Engineering and Technology, 10(03). https://doi.org/10.4236/wjet.2022.103042 DOI: https://doi.org/10.4236/wjet.2022.103042
Hadi Nurwahyudin, Mochammad Rajib El Atros, & Mualif. (2025). Analisis Pengaruh Pengaturan Parameter pada CNC Cutting Laser terhadap Kualitas Hasil Pemotongan pada Material Stainless Steel 304 di PT X. Jurnal Engine: Energi, Manufaktur, Dan Material, 9(1). https://doi.org/10.30588/jeemm.v9i1.2164 DOI: https://doi.org/10.30588/jeemm.v9i1.2164
Ibarra Kwick, J. M., Hernández-Uribe, Ó., Cárdenas-Robledo, L. A., & Luque-Morales, R. A. (2024). Extended Reality Applications for CNC Machine Training: A Systematic Review. In Multimodal Technologies and Interaction (Vol. 8, Issue 9). https://doi.org/10.3390/mti8090080 DOI: https://doi.org/10.3390/mti8090080
Kaarlela, T., & Outeiro, J. (2025). A cyber-physical machine tool concept for education and workforce training in CNC machining. Manufacturing Letters, 44. https://doi.org/10.1016/j.mfglet.2025.06.140 DOI: https://doi.org/10.1016/j.mfglet.2025.06.140
Katduang, T., Maneetham, D., Crisnapati, P. N., & Srichaipanya, W. (2024). Integrating Low-Cost Mini CNC Machines with IoTEnabled Energy Monitoring and Machine Learning for Sustainable Manufacturing. International Journal of Engineering Trends and Technology, 72(6). https://doi.org/10.14445/22315381/IJETT-V72I6P109 DOI: https://doi.org/10.14445/22315381/IJETT-V72I6P109
Kumar, R. (2024). Optimizing Machine Selection and Cost of Quality: A Comprehensive Approach for Enhanced Industrial Efficiency and Economic Growth. International Journal for Research in Applied Science and Engineering Technology, 12(4). https://doi.org/10.22214/ijraset.2024.60745 DOI: https://doi.org/10.22214/ijraset.2024.60745
Li, X., & Liu, X. (2024). Efficient identification of geometric errors in CNC machine tools based on dual-frequency laser interferometry. Journal of Measurements in Engineering, 12(4). https://doi.org/10.21595/jme.2024.24100 DOI: https://doi.org/10.21595/jme.2024.24100
Muhammad Ilham Romadoni, & Rr. Rochmoeljati. (2024). Analisis Beban Kerja Operator Mesin Cnc Laser Salvagnini Dengan Metode Fte Di PT. Xyz. Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro Dan Informatika, 2(1). https://doi.org/10.61132/jupiter.v2i1.65 DOI: https://doi.org/10.61132/jupiter.v2i1.65
Ngadiyono, Y., Saputra, D. A., Setiadi, B. R., & Pardjono, P. (2025). Taguchi’s Method for Optimum Cutting of Acrylic Materials on a 40-Watt CNC Laser Cutting Machine. TEM Journal, 14(1). https://doi.org/10.18421/TEM141-82 DOI: https://doi.org/10.18421/TEM141-82
Occupational Safety and Health Center. (2026). Work environment measurement providers. Department of Labor and Employment. [Occupational Safety and Health Center, Work Environment Measurement Providers](https://oshc.dole.gov.ph/work-environment-measurement-providers/?utm_source=chatgpt.com)
Oleksiak, B., Ciecińska, B., Ołów, P., & Hordyńska, M. (2023). Analysis of the Possibility of Introducing the Reduction of Changeover Time of Selected CNC Machines Using the SMED Method. Production Engineering Archives, 29(1). https://doi.org/10.30657/pea.2023.29.10 DOI: https://doi.org/10.30657/pea.2023.29.10
Republic Act No. 11058. (2018). An act strengthening compliance with occupational safety and health standards and providing penalties for violations thereof. Official Gazette of the Republic of the Philippines. [Republic Act No. 11058](https://lawphil.net/statutes/repacts/ra2018/ra_11058_2018.html?utm_source=chatgpt.com)
Republic Act No. 8749. (1999). Philippine Clean Air Act of 1999. Official Gazette of the Republic of the Philippines. [Republic Act No. 8749](https://lawphil.net/statutes/repacts/ra1999/ra_8749_1999.html?utm_source=chatgpt.com)
Republic Act No. 9514. (2008). Revised Fire Code of the Philippines of 2008. Official Gazette of the Republic of the Philippines. [Republic Act No. 9514](https://lawphil.net/statutes/repacts/ra2008/ra_9514_2008.html?utm_source=chatgpt.com)
Schmitt, A. M., Miller, E., Engelmann, B., Batres, R., & Schmitt, J. (2024). G-code evaluation in CNC milling to predict energy consumption through Machine Learning. Advances in Industrial and Manufacturing Engineering, 8. https://doi.org/10.1016/j.aime.2024.100140 DOI: https://doi.org/10.1016/j.aime.2024.100140
Sneineh, A. A., Salah, W. A., Zneid, B. A., Elnaggar, M., & Abuhelwa, M. (2025). Development and Evaluation of a Low-Cost CNC Wood Carving Machine for Artisanal Applications. Journal of Robotics and Control (JRC), 6(2). https://doi.org/10.18196/jrc.v6i2.25554 DOI: https://doi.org/10.18196/jrc.v6i2.25554
Soori, M., Ghaleh Jough, F. K., Dastres, R., & Arezoo, B. (2024). Sustainable CNC machining operations, a review. In Sustainable Operations and Computers (Vol. 5). https://doi.org/10.1016/j.susoc.2024.01.001 DOI: https://doi.org/10.1016/j.susoc.2024.01.001
Subagyo, I. R., & Prasetyaningrum, P. T. (2024). Optimizing Arduino-Based Laser Cut Machine Settings for Home Industry. International Journal of Artificial Intelligence and Science, 1(1). https://doi.org/10.63158/ijais.v1.i1.3 DOI: https://doi.org/10.63158/IJAIS.v1.i1.3
Wang, L., Han, J., Tang, Z., Zhang, Y., Wang, D., & Li, X. (2025). Geometric Accuracy Design of High Performance CNC Machine Tools: Modeling, Analysis, and Optimization. In Chinese Journal of Mechanical Engineering (English Edition) (Vol. 38, Issue 1). https://doi.org/10.1186/s10033-025-01258-y DOI: https://doi.org/10.1186/s10033-025-01258-y
Wu, Z., He, L., Wang, W., Ju, Y., & Guo, Q. (2024). A Fault Prediction Method for CNC Machine Tools Based on SE-ResNet-Transformer. Machines, 12(6). https://doi.org/10.3390/machines12060418 DOI: https://doi.org/10.3390/machines12060418
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Floret I. Batoctoy (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal the right of first publication. All articles are published under the Creative Commons Attribution 4.0 International (CC BY 4.0) License. This license permits use, sharing, adaptation, distribution, and reproduction in any medium or format, including for commercial purposes, provided that appropriate credit is given to the original author(s) and the journal, a link to the license is provided, and any changes made are indicated.